Fire Stopping & Fire Door Contractors in Leeds

TECL has been based in Leeds since 2009. From our head office in Hunslet, our directly employed teams install certified fire stopping, acoustic sealing, fire doors and intumescent paint across Leeds and West Yorkshire. We’re third-party certified under LPS 1531, and we’ve recorded every seal digitally since 2010.

Call our Leeds office on 0113 243 0254.

Two specialist divisions

Fire stopping and passive fire protection

Led by Adam Duffield, our fire stopping division installs:

  • Fire stopping and penetration sealing, with fire ratings of up to four hours
  • Slab edge fire stopping
  • Rainscreen fire stopping
  • Static fire curtains and flexible fire barriers (approved Firefly installer)
  • Smoke and fire control zones
  • Intumescent paint for structural steel
  • Acoustic sealing
  • Temporary fire hoarding for live sites

Fire doors

Led by Adam Bennett, our fire door division supplies, installs and inspects fire doors, and is BM TRADA certified for fire door installation.

Recent projects in Leeds and West Yorkshire

Monk Bridge, Leeds: fire protection on a new development just outside Leeds city centre.

Drapers Yard, Leeds: fire safety works for Overbury on the former Kays Catalogue Warehouse, now the Labcorp life sciences centre.

Newsome Academy, Huddersfield: fire stopping that drew strong feedback from building control.

Berry Brow Flats, Huddersfield: fire door works for Kirklees Council.

Ledston Hall, Pontefract: fire protection in a historic country house.

Every seal recorded, every job certified

Once ceilings and risers are closed, fire stopping can’t be seen. That’s why our operatives photograph every seal, mark it on the drawings and log the product, tested detail and installer. You get a complete record for building control, your O&M manual and the golden thread, and an LPCB certificate for the job.

Passive fire protection in Leeds

Fire stopping is one part of passive fire protection: the measures built into a building that keep a fire in the compartment where it starts, so people have time to get out and firefighters can work safely. Every time a pipe, cable, duct or beam passes through a fire-rated wall or floor, it leaves a gap that fire and smoke can travel through. Fire stopping closes that gap with a tested, certified seal.

Our Leeds teams install the full range of passive fire protection, so one directly employed contractor can cover a whole building:

  • Penetration seals for pipes, cables, ducts and mixed services
  • Linear joint seals, head-of-wall seals and slab edge fire stopping
  • Cavity barriers, including rainscreen and external wall cavity barriers
  • Static fire curtains and flexible fire barriers
  • Intumescent paint for structural steel
  • Fire doors, with the fire stopping around the frame done by the same team

Fire stopping and the regulations

In England, Approved Document B of the Building Regulations sets out how a building must be divided into fire compartments, and those compartments only work if every penetration through them is properly sealed. Poorly installed or missing fire stopping is one of the most common defects found in fire risk assessments and building control inspections.

Since the Building Safety Act 2022, the bar is higher. For higher-risk buildings (at least 18 metres or seven storeys with two or more homes), the Building Safety Regulator checks the fire strategy before work starts (Gateway 2) and the evidence of what was built before the building can be occupied (Gateway 3). That evidence forms part of the golden thread: the digital record of how the building was designed, built and maintained. For existing buildings, the Fire Safety Order 2005, clarified by the Fire Safety Act 2021, makes the responsible person accountable for the building’s structure and compartmentation.

That’s why the seal-by-seal record described above matters: it gives you evidence that stands up to building control, Gateway 3 and a fire risk assessor.

How LPS 1531 certification protects you

LPS 1531 is the Loss Prevention Certification Board (LPCB) scheme for installers of passive fire protection. To hold it, a contractor’s procedures, training and finished work are audited by LPCB, including inspections of live sites. Certified firms are listed on RedBookLive, so you can check us before you appoint us.

For you, it means three things: the people fitting the seals are trained and assessed, the seals are installed to a tested detail rather than improvised on site, and you receive an LPCB certificate of conformity for the work at the end of the job.

How we work

  1. Survey. We visit the site, look at the services and the walls and floors they pass through, and agree the scope with you.
  2. Tested details. We match every type of penetration to a manufacturer’s tested and approved solution for the fire rating needed.
  3. Installation. Our directly employed operatives install the seals, working around live and occupied buildings where needed.
  4. Recording. Every seal is photographed, numbered on the drawings and logged as it is completed.
  5. Inspection. Our supervisors check the work before it is closed up behind ceilings, in risers or behind boarding.
  6. Handover. You receive the full record and the LPCB certificate for your O&M manual and the golden thread.

Who we work for in Leeds

We work for main contractors, housing providers, councils, schools and building owners across Leeds and West Yorkshire, on new builds, refurbishments and remedial projects. Our projects range from new developments in Leeds city centre to schools, council housing and historic buildings, where the work has to fit around the people using them.

Areas we cover from Leeds

Leeds, Bradford, Wakefield, Huddersfield, Halifax, Dewsbury, Pontefract, Castleford and the rest of West Yorkshire.

In Leeds itself, our teams work across the city centre and South Bank, Holbeck, Hunslet (where our head office is), Headingley, Kirkstall, Roundhay, Seacroft, Morley, Pudsey, Horsforth and Garforth, on new apartment and student accommodation schemes, schools, refurbishments and occupied housing.

Our Leeds office

Thermal Engineering Contracts Ltd (TECL)
38 Whitehouse Street, Hunslet, Leeds LS10 1AD
0113 243 0254 | [email protected]

Frequently Asked Questions

Do you work across West Yorkshire?

Yes. Our Leeds teams cover the whole of West Yorkshire, and our other offices cover North Yorkshire, South Yorkshire, the North East and the East Midlands.

Are your fire stoppers employed by TECL?

Yes. We have more than 70 directly employed, fully trained operatives and don’t use labour-only gangs.

Can you work in occupied buildings?

Yes. We regularly work in live and occupied buildings, including schools, housing and heritage properties, planning the work around residents and users.

Who checks fire safety in Leeds buildings?

West Yorkshire Fire and Rescue Service enforces fire safety in most non-domestic and shared residential buildings. Higher-risk residential buildings also fall under the Building Safety Regulator.

Do you offer a free survey?

Yes. We visit your site before we quote, then offer a fixed lump sum with a guaranteed maximum price, or a schedule of rates.

Is TECL LPCB certified for fire stopping?

Yes. TECL is third-party certified under LPS 1531, the LPCB scheme for installers of passive fire protection, and is listed on RedBookLive. You receive an LPCB certificate of conformity for the work we complete.

What records do you provide when the job is finished?

Every seal is photographed, marked on the drawings and logged with the product, the tested detail and the installer. You get the full record and the LPCB certificate, ready for your O&M manual, building control and the golden thread.

Do you fit fire doors in Leeds as well as fire stopping?

Yes. Our fire door division is BM TRADA certified for fire door installation, and the same teams can fire stop around the frames. See our fire door installation in Leeds page for details.

Need fire stopping in Leeds? Call 0113 243 0254, email [email protected] or send us your drawings for a free quote.